Ring Diameter=L=3 1/4” W=3”
Plate L=7.5” W=1 1/4”
Peg to screw install @ 3 1/4” apart
Ring L=1 3/4” Plate Diameter=1 3/4” (can install with or without the plates)
Screw to Peg=3/4” (install with screw to peg vertically/see last 2 pics)Ring Full L=2.5” W=1.5”Plate Full L=1 3/4” W=1"
Screw to screw=2 1/4”/2 screw install horizontally)
Ring L=1.5” W=3”
Screw to screw=1 1/4” (2 horizontal screw install/see last pic) Ring Diameter =2”
Ring L=1.5” W=2”
Plate 4.5” Single screw install/Install with or without the plate..
Screw to screw=1 1/4” install with screws horizontally @ top/see last pic) Pull Full L=5” W=3.5”
Screw to screw=1 3/4” (2 screw install see last pic)
Diameter=2”
Screw to screw=3” (install with screws vertically/see last pic) Pull Full L=4” W=3”
Screw to screw=2.5" (2 Screw install)
Ring L=1 3/4" W=3.5"
Screw to Screw=2.5” (2 screw install/See last pic) Ring L=1.5” Plate L=3” W=1.5”
Screw to screw=1 1/4” (Vertical screw install see last pic.. )
Full L=3 3/4” Ring L=2.5 W=2”
Screw to screw=1.5” (2 screw install going vertically/See last pic)
Pull Full L=4” W=3”
Screw to screw=1.5” (2 screw install horizontally)
Ring L=2” W=2 3/4”
Screw to screw =1.5” (2 screw vertical install/see last pic)
Pull Full L=2 3/4” W=3”
Screw to screw =1.5” (2 screw vertical install/see last pic)
Pull Full L=3” W=3.5”
Ring L=2 1/4” W=2.5”
Plate Diameter=1” Single screw install/Install with or without the plate (however there are only 5 plates so 1 missing).,
Ring L=2 1/4” W=2.5”
Plate Diameter =1 1/8 (install with or without).
Ring L=1 1/4” W=2 1/4”
Plate Diameter=1 3/4”
2 screw install horizontally=1 1/4” (plate is not detachable)..
Screw to screw=2” (2 screw install vertically /see last pic)..
Ring L=2 1/4” W=4”
Plate L=5” W= 2 1/8”
Add a footnote if this applies to your business